Courses offered in Materials Science are listed below. Be aware that some courses are not offered every year; see the course schedule page to check if the class is offered this year.
Materials Science Courses
- MS 78 abc. Senior Thesis. 9 units; first, second, third terms. Prerequisite: instructor’s permission. Supervised research experience, open only to senior materials science majors. Starting with an open-ended topic, students will plan and execute a project in materials science and engineering that includes written and oral reports based upon actual results, synthesizing topics from their course work. Only the first term may be taken pass/fail. Instructor: Staff.
- MS 90. Materials Science Laboratory. 9 units (1-6-2); third term. An introductory laboratory in relationships between the structure and properties of materials. Experiments involve materials processing and characterization by X-ray diffraction, scanning electron microscopy, and optical microscopy. Students will learn techniques for measuring mechanical and electrical properties of materials, as well as how to optimize these properties through microstructural and chemical control. Independent projects may be performed depending on the student’s interests and abilities. Instructor: Hofmann.
- MS 100. Advanced Work in Materials Science. The staff in materials science will arrange special courses or problems to meet the needs of students working toward the M.S. degree or of qualified undergraduate students. Graded pass/fail for research and reading. Instructor: Staff.
- APh/MS 105 abc. States of Matter. 9 units (3-0-6); first, second, third terms. Prerequisites: APh 17 abc or equivalent. Thermodynamics and statistical mechanics, with emphasis on gases, liquids, materials, and condensed matter. Effects of heat, pressure, and fields on states of matter are presented with both classical thermodynamics and with statistical mechanics. Conditions of equilibrium in systems with multiple degrees of freedom. Applications include ordered states of matter and phase transitions. The three terms cover, approximately, thermodynamics, statistical mechanics, and phase transitions. APh/MS 105ab not offered 2018-2019. APh/MS 105c Instructor: Fultz.
- MS 110 abc. Materials Research Lectures. 1 unit (1-0-0); first, second, third terms. A seminar course designed to introduce advanced undergraduates and graduate students to modern research in materials science. Instructors: Bernardi, Faber, Fultz.
- MS 115. Fundamentals of Materials Science. 9 units (3-0-6); first term. Prerequisites: Ph 2. An introduction to the structure and properties of materials and the processing routes utilized to optimize properties. All major classes of materials are covered, including metals, ceramics, electronic materials, composites, and polymers. The relationships between chemical bonding, crystal structure, thermodynamics, phase equilibria, microstructure, and properties are described. Instructor: Faber.
- MS/ME/MedE 116. Mechanical Behavior of Materials. 9 units (3-0-6); second term. Introduction to the mechanical behavior of solids, emphasizing the relationships between microstructure, architecture, defects, and mechanical properties. Elastic, inelastic, and plastic properties of crystalline and amorphous materials. Relations between stress and strains for different types of materials. Introduction to dislocation theory, motion and forces on dislocations, strengthening mechanisms in crystalline solids. Nanomaterials: properties, fabrication, and mechanics. Architected solids: fabrication, deformation, failure, and energy absorption. Biomaterials: mechanical properties of composites, multi-scale microstructure, biological vs. synthetic, shear lag model. Fracture in brittle solids and linear elastic fracture mechanics. Instructor: Greer.
- MS 121. Laboratory Research Methods in Materials Science. 9 units (1-4-4); second term. Prerequisites: MS 115 or graduate standing. Introduction to experimental methods and approaches for the analysis of structure, dynamics, and properties of materials. Staff members with expertise in various areas including mechanical testing, calorimetry, X-ray diffraction, scanning and transmission electron microscopy, solid state NMR and electrochemistry will introduce and supervise experiments in their specialty. As the situation permits, students are given a choice in selecting experiments. Instructor: Ahn.
- MS/APh 122. Diffraction, Imaging, and Structure. 9 units (0-4-5); first term. Prerequisites: MS 132, may be taken concurrently. Experimental methods in transmission electron microscopy of inorganic materials including diffraction, spectroscopy, conventional imaging, high resolution imaging and sample preparation. Weekly laboratory exercises to complement material in MS 132. Instructor: Ahn.
- MS 125. Advanced Transmission Electron Microscopy. 9 units (1-6-2); third term. Prerequisite: MS 122. Diffraction contrast analysis of crystalline defects. Phase contrast imaging. Physical optics approach to dynamical electron diffraction and imaging. Microbeam methods for diffraction and imaging. Chemical analysis by energy dispersive X-ray spectrometry and electron energy loss spectrometry. Instructor: Staff. Not offered 2018–2019.
- MS 131. Structure and Bonding in Materials. 9 units (3-0-6); second term. Prerequisites: graduate standing or introductory quantum mechanics. Electronic structure and orbitals in atoms. Structure and symmetry of crystals. Reciprocal space and Brillouin zone. Born-Oppenheimer approximation. Bloch states and band theory. Tight binding and plane-waves. Lattice vibrations and lattice waves. Total energy, entropy, and Gibbs free energy in solids. Stability criteria. Bonding and electronic structure in metals, semiconductors, ionic crystals, and transition metal oxides. Point and line defects. Introduction to surfaces and amorphous materials. Instructor: Bernardi.
- MS 132. Diffraction and Structure. 9 units (3-0-6); first term. Prerequisites: graduate standing or instructor’s permission. Principles of electron, X-ray, and neutron diffraction with applications to materials characterization. Imaging with electrons, and diffraction contrast of crystal defects. Kinematical theory of diffraction: effects of strain, size, disorder, and temperature. Correlation functions in solids, with introduction to space-time correlation functions. Instructor: Fultz.
- MS 133. Kinetic Processes in Materials. 9 units (3-0-6); third term. Prerequisite: APh 105 b or ChE/Ch 164, or instructor’s permission. Kinetic master equation, uncorrelated and correlated random walk, diffusion. Mechanisms of diffusion and atom transport in solids, liquids, and gases. Coarsening of microstructures. Nonequilibrium processing of materials. Instructors: Faber/Kornfield.
- MS 142. Application of Diffraction Techniques in Materials Science. 9 units (2-3-4); second term. Prerequisite: Instructor’s permission. Applications of X-ray and neutron diffraction methods to the structural characterization of materials. Emphasis is on the analysis of polycrystalline materials but some discussion of single crystal methods is also presented. Techniques include quantitative phase analysis, crystalline size measurement, lattice parameter refinement, internal stress measurement, quantification of preferred orientation (texture) in materials, Rietveld refinement, and determination of structural features from small angle scattering. Homework assignments will focus on analysis of diffraction data. Samples of interest to students for their thesis research may be examined where appropriate. Not offered 2018-2019.
- MS 150abc. Topics in Materials Science. Units to be arranged; first, second, third terms. Content will vary from year to year, but will be at a level suitable for advanced undergraduate or graduate students. Topics are chosen according to the interests of students and faculty. Visiting faculty may present portions of the course. Instructor: Staff.
- MS/ME 161. Imperfections in Crystals. 9 units (3-0-6); third term. Prerequisite: graduate standing or MS 115. The relation of lattice defects to the physical and mechanical properties of crystalline solids. Introduction to point imperfections and their relationships to transport properties in metallic, covalent, and ionic crystals. Kroeger-Vink notation. Introduction to dislocations: geometric, crystallographic, elastic, and energetic properties of dislocations. Dislocation reactions and interactions including formation of locks, stacking faults, and surface effects. Relations between collective dislocation behavior and mechanical properties of crystals. Introduction to computer simulations of dislocations. Grain boundaries. The structure and properties of interfaces in solids. Emphasis on materials science aspects of role of defects in electrical, morphological, optical, and mechanical properties of solids. Instructor: Greer.
- MS/ME 166. Fracture of Brittle Solids. 9 units (3-0-6); third term. Prerequisites: MS 115a (or equivalent). The mechanical response of brittle materials (ceramics, glasses and some network polymers) will be treated using classical elasticity, energy criteria, and fracture mechanics. The influence of environment and microstructure on mechanical behavior will be explored. Transformation toughened systems, large-grain crack-bridging systems, nanostructured ceramics, porous ceramics, anomolous glasses, and the role of residual stresses will be highlighted. Strength, flaw statistics and reliability will be discussed. Not offered 2018-2019.
- MS 200. Advanced Work in Materials Science. The staff in materials science will arrange special courses or problems to meet the needs of advanced graduate students.
- Ae/AM/MS/ME 213. Mechanics and Materials Aspects of Fracture. 9 units (3-0-6); first term. Prerequisites: Ae/AM/CE/ME 102 abc (concurrently) or equivalent and instructor’s permission. Analytical and experimental techniques in the study of fracture in metallic and nonmetallic solids. Mechanics of brittle and ductile fracture; connections between the continuum descriptions of fracture and micromechanisms. Discussion of elastic-plastic fracture analysis and fracture criteria. Special topics include fracture by cleavage, void growth, rate sensitivity, crack deflection and toughening mechanisms, as well as fracture of nontraditional materials. Fatigue crack growth and life prediction techniques will also be discussed. In addition, “dynamic” stress wave dominated, failure initiation growth and arrest phenomena will be covered. This will include traditional dynamic fracture considerations as well as discussions of failure by adiabatic shear localization. Instructor: Rosakis.
- APh/MS 256. Computational Solid State Physics and Materials Science. 9 units (3-3-3); third term. Prerequisites: Ph125 or equivalent and APh114ab or equivalent. The course will cover first-principles computational methods to study electronic structure, lattice vibrations, optical properties, and charge and heat transport in materials. Topics include: Theory and practice of Density Functional Theory (DFT) and the total-energy pseudopotential method. DFT calculations of total energy, structure, defects, charge density, bandstructures, density of states, ferroelectricity and magnetism. Lattice vibrations using the finite-difference supercell and Density Functional Perturbation Theory (DFPT) methods. Electron-electron interactions, screening, and the GW method. GW bandstructure calculations. Optical properties, excitons, and the GW-Bethe Salpeter equation method. Ab initio Boltzmann transport equation (BTE) for electrons and phonons. Computations of heat and charge transport within the BTE framework. If time permits, selected advanced topics will be covered, including methods to treat vander Waals bonds, spin-orbit coupling, correlated materials, and quantum dynamics. Several laboratories will give students direct experience with running first-principles calculations. Not offered 2018-2019.
- ME/MS 260. Micromechanics. 9 units (3-0-6); third term. Prerequisites: ACM 95/100 or equivalent, and Ae/AM/CE/ME 102 abc or Ae 160 abc or instructor’s permission. The course gives a broad overview of micromechanics, emphasizing the microstructure of materials, its connection to molecular structure, and its consequences on macroscopic properties. Topics include phase transformations in crystalline solids, including martensitic, ferroelectric, and diffusional phase transformations, twinning and domain patterns, active materials; effective properties of composites and polycrystals, linear and nonlinear homogenization; defects, including dislocations, surface steps, and domain walls; thin films, asymptotic methods, morphological instabilities, self-organization; selected applications to microactuation, thin-film processing, composite materials, mechanical properties, and materials design. Open to undergraduates with instructor’s permission. Not offered 2018–19.
- MS 300. Thesis Research.